Sample Name:
CBD Double Strength Cream 21251_#19
Infused, Hemp Infused
Date Issued:
09/14/2021
Hover to Zoom InSample Information
Cultivator / Manufacturer
Distributor / Tested For
Share
Easily share a link to this results page with your friends, followers, or business partners.
Cannabinoid Analysis - Summary
Total THC: Not Detected
Total CBD: 9.609 mg/g
Sum of Cannabinoids: 9.630 mg/g
Total Cannabinoids: 9.630 mg/g
Total THC/CBD is calculated using the following formulas to take into account the loss of a carboxyl group during the decarboxylation step:
Total THC = Δ9-THC + (THCa (0.877))
Total CBD = CBD + (CBDa (0.877))
Sum of Cannabinoids = Δ9-THC + THCa + CBD + CBDa + CBG + CBGa + THCV + THCVa + CBC + CBCa + CBDV + CBDVa + Δ8-THC + CBL + CBN
Total Cannabinoids = (Δ9-THC+0.877*THCa) + (CBD+0.877*CBDa) + (CBG+0.877*CBGa) + (THCV+0.877*THCVa) + (CBC+0.877*CBCa) + (CBDV+0.877*CBDVa) + Δ8-THC + CBL + CBN
Sum of Cannabinoids: The concentration of each individual cannabinoid added together as they are, without accounting for decarboxylation. This measurement is of particular importance for certain cannabis products that are not intended to be heated prior to application or consumption.
Total Cannabinoids: The concentration of each acidic cannabinoid, multiplied by 0.877 to account for the loss of molecular mass that happens as it is converted to a neutral cannabinoid when heated. Then this calculated concentration is added to the concentrations of the corresponding neutral cannabinoid already present. This corrected data is of particular importance to both producers and consumers of products intended to be heated prior to application or consumption.
Safety Analysis - Summary
Pesticides: ND
Residual Solvents: ND
Heavy Metals: ND
Microbiology (PCR): ND
Microbiology (Plating): ND
View Complete Test Results:
Cannabinoid Analysis
Tested
Show More
Tested by high-performance liquid chromatography with diode-array detection (HPLC-DAD).
Method: QSP 1157 - Analysis of Cannabinoids by HPLC-DAD
Cannabinoid Test Results
09/12/2021
Result Views
Swipe left on table to see additional columns
| Compound |
LOD/LOQ (mg/g) |
Measurement Uncertainty (mg/g) |
Result (mg/g) |
Result (%) |
|---|---|---|---|---|
| Cannabidiol (CBD) | 0.004 / 0.011 | ±0.4603 | 9.609 | 0.9609 |
| Cannabidivarin (CBDV) | 0.002 / 0.012 | ±0.0011 | 0.021 | 0.0021 |
| Cannabichromene (CBC) | 0.003 / 0.010 | N/A | ND | ND |
| Cannabigerol (CBG) | 0.002 / 0.006 | N/A | ND | ND |
| Cannabicyclol (CBL) | 0.003 / 0.010 | N/A | ND | ND |
| Cannabinol (CBN) | 0.001 / 0.007 | N/A | ND | ND |
| Cannabichromenic Acid (CBCa) | 0.001 / 0.015 | N/A | ND | ND |
| Cannabidiolic Acid (CBDa) | 0.001 / 0.026 | N/A | ND | ND |
| Cannabigerolic Acid (CBGa) | 0.002 / 0.007 | N/A | ND | ND |
| Tetrahydrocannabivarin (THCV) | 0.002 / 0.012 | N/A | ND | ND |
| Tetrahydrocannabinolic Acid (THCa) | 0.001 / 0.005 | N/A | ND | ND |
| Cannabidivarinic Acid (CBDVa) | 0.001 / 0.018 | N/A | ND | ND |
| Tetrahydrocannabivarinic Acid (THCVa) | 0.002 / 0.019 | N/A | ND | ND |
| ∆8 Tetrahydrocannabinol (Δ8THC) | 0.01 / 0.02 | N/A | ND | ND |
| Δ9 Tetrahydrocannabinol (Δ9THC) | 0.002 / 0.014 | N/A | ND | ND |
| SUM OF CANNABINOIDS | 9.630 mg/g | 0.963% |
Learn more
The cannabis plant contains dozens of active compounds called cannabinoids. These compounds are the primary contributors to the psychoactive effects of cannabis.
Cannabinoid testing determines the potency of a sample to aid in dosage considerations.
Pesticide Analysis
ND
Show More
Pesticide and plant growth regulator analysis utilizing high-performance liquid chromatography-mass spectrometry (HPLC-MS) or gas chromatography-mass spectrometry (GC-MS).
*GC-MS utilized where indicated.
Method: QSP 1212 - Analysis of Pesticides and Mycotoxins by LC-MS or QSP 1213 - Analysis of Pesticides by GC-MS
Pesticide Test Results
09/11/2021
ND
Swipe left on table to see additional columns
| Compound |
LOD/LOQ (μg/g) |
Action Limit (μg/g) |
Measurement Uncertainty (μg/g) |
Result (μg/g) |
|---|---|---|---|---|
| Abamectin | 0.03 / 0.10 | 0.3 | N/A | ND |
| Azoxystrobin | 0.01 / 0.04 | 40 | N/A | ND |
| Bifenazate | 0.01 / 0.02 | 5 | N/A | ND |
| Bifenthrin | 0.01 / 0.02 | 0.5 | N/A | ND |
| Boscalid | 0.02 / 0.06 | 10 | N/A | ND |
| Chlorpyrifos | 0.02 / 0.06 | ≥ LOD | N/A | ND |
| Cypermethrin | 0.1 / 0.3 | 1 | N/A | ND |
| Etoxazole | 0.010 / 0.028 | 1.5 | N/A | ND |
| Hexythiazox | 0.01 / 0.04 | 2 | N/A | ND |
| Imidacloprid | 0.01 / 0.04 | 3 | N/A | ND |
| Malathion | 0.02 / 0.05 | 5 | N/A | ND |
| Myclobutanil | 0.03 / 0.1 | 9 | N/A | ND |
| Permethrin | 0.03 / 0.09 | 20 | N/A | ND |
| Piperonyl Butoxide | 0.003 / 0.009 | 8 | N/A | ND |
| Propiconazole | 0.01 / 0.03 | 20 | N/A | ND |
| Spiromesifen | 0.02 / 0.05 | 12 | N/A | ND |
| Tebuconazole | 0.02 / 0.07 | 2 | N/A | ND |
| Trifloxystrobin | 0.01 / 0.03 | 30 | N/A | ND |
Residual Solvents Analysis
ND
Show More
Residual Solvent analysis utilizing gas chromatography-mass spectrometry (GC-MS).
Method: QSP 1204 - Analysis of Residual Solvents by GC-MS
Residual Solvents Test Results
09/12/2021
ND
Swipe left on table to see additional columns
| Compound |
LOD/LOQ (μg/g) |
Action Limit (μg/g) |
Measurement Uncertainty (μg/g) |
Result (μg/g) |
|---|---|---|---|---|
| 1,2-Dichloroethane | 0.05 / 0.1 | 1 | N/A | ND |
| Benzene | 0.03 / 0.09 | 1 | N/A | ND |
| Chloroform | 0.1 / 0.2 | 1 | N/A | ND |
| Dichloromethane (Methylene Chloride) | 0.3 / 0.9 | 1 | N/A | ND |
| Ethylene Oxide | 0.3 / 0.8 | 1 | N/A | ND |
| Trichloroethylene | 0.1 / 0.3 | 1 | N/A | ND |
| 2-Propanol (Isopropyl Alcohol) | 10 / 40 | 5000 | N/A | ND |
| Acetone | 20 / 50 | 5000 | N/A | ND |
| Acetonitrile | 2 / 7 | 410 | N/A | ND |
| Ethanol | 20 / 50 | 5000 | N/A | ND |
| Ethyl Acetate | 20 / 60 | 5000 | N/A | ND |
| Ethyl Ether | 20 / 50 | 5000 | N/A | ND |
| Methanol | 50 / 200 | 3000 | N/A | ND |
| n-Butane | 10 / 50 | 5000 | N/A | ND |
| n-Heptane | 20 / 60 | 5000 | N/A | ND |
| n-Hexane | 2 / 5 | 290 | N/A | ND |
| n-Pentane | 20 / 50 | 5000 | N/A | ND |
| Propane | 10 / 20 | 5000 | N/A | ND |
| Toluene | 7 / 21 | 890 | N/A | ND |
| Total Xylenes | 50 / 160 | 2170 | N/A | ND |
Heavy Metals Analysis
ND
Show More
Heavy metal analysis utilizing inductively coupled plasma-mass spectrometry (ICP-MS).
Method: QSP 1160 - Analysis of Heavy Metals by ICP-MS
Heavy Metals Test Results
09/11/2021
ND
Swipe left on table to see additional columns
| Compound |
LOD/LOQ (μg/g) |
Action Limit (μg/g) |
Measurement Uncertainty (μg/g) |
Result (μg/g) |
|---|---|---|---|---|
| Arsenic | 0.02 / 0.1 | 0.42 | N/A | ND |
| Cadmium | 0.02 / 0.05 | 0.27 | N/A | ND |
| Lead | 0.04 / 0.1 | 0.5 | N/A | ND |
| Mercury | 0.002 / 0.01 | 0.4 | N/A | ND |
Microbiology Analysis
ND
Show More
Analysis conducted by polymerase chain reaction (PCR) and fluorescence detection of microbiological contaminants. And Analysis conducted by 3MTM PetrifilmTM and plate counts of microbiological contaminants.
Method: QSP 1221 - Analysis of Microbiological Contaminants and QSP 6794 - Plating with 3MTM PetrifilmTM
Microbiology Test Results (PCR)
09/14/2021
ND
Swipe left on table to see additional columns
| Compound | Action Limit |
Result (cfu/g) |
|---|---|---|
| Salmonella spp. | Not Detected in 1g | ND |
| Staphylococcus aureus | Not Detected in 1g | ND |
| Bile-Tolerant Gram-Negative Bacteria | 100 | ND |
| Shiga toxin-producing Escherichia coli | Not Detected in 1g | ND |
Microbiology Test Results (PLATING)
09/14/2021
ND
Swipe left on table to see additional columns
| Compound |
Action Limit (cfu/g) |
Result (cfu/g) |
|---|---|---|
| Total Yeast and Mold | 10 | ND |
| Total Aerobic Bacteria | 100 | ND |
COA ID: 210910N048-001
For quality assurance purposes. Not a Regulatory Hemp Lab Test Report. These results relate only to the sample included on this report. This report shall not be reproduced, except in full, without written approval of the laboratory.
Sample Certification: Action Limits used in this report are a compilation of guidance from state regulatory agencies in all states except Alaska. Action limits for required tests are the lower of any conflicting state regulations.
Decision Rule: Statements of conformity (e.g. Pass/Fail) to specifications are made in this report without taking measurement uncertainty into account. Where statements of conformity are made in this report, the following decision rules are applied: PASS - Results within limits/specifications, FAIL - Results exceed limits/specifications.
References: limit of detection (LOD), limit of quantification (LOQ), not detected (ND), not tested (NT), μg/g = ppm, μg/kg = ppb, too numerous to count >250 cfu/plate (TNTC), colony-forming unit (cfu)
SC Laboratories California LLC. | 100 Pioneer Street, Suite E, Santa Cruz, CA 95060 | (866) 435-0709 | sclabs.com | C8-0000013-LIC | ISO/IES 17025:2017 PJLA Accreditation Number 87168