Sample Name:
CherryP-05
Concentrate, Product Inhalable
Date Issued:
04/03/2025
Hover to Zoom InSample Information
Cultivator / Manufacturer
Distributor / Tested For
Share
Easily share a link to this results page with your friends, followers, or business partners.
Cannabinoid Analysis - Summary
Total THC: 78.165%
Total CBD: 0.118%
Sum of Cannabinoids: 91.14%
Total Cannabinoids: 80.82%
Total THC/CBD is calculated using the following formulas to take into account the loss of a carboxyl group during the decarboxylation step:
Total THC = Δ9-THC + (THCa (0.877))
Total CBD = CBD + (CBDa (0.877))
Sum of Cannabinoids = Δ9-THC + THCa + CBD + CBDa + CBG + CBGa + THCV + THCVa + CBC + CBCa + CBDV + CBDVa + Δ8-THC + CBL + CBN
Total Cannabinoids = (Δ9-THC+0.877*THCa) + (CBD+0.877*CBDa) + (CBG+0.877*CBGa) + (THCV+0.877*THCVa) + (CBC+0.877*CBCa) + (CBDV+0.877*CBDVa) + Δ8-THC + CBL + CBN
Sum of Cannabinoids: The concentration of each individual cannabinoid added together as they are, without accounting for decarboxylation. This measurement is of particular importance for certain cannabis products that are not intended to be heated prior to application or consumption.
Total Cannabinoids: The concentration of each acidic cannabinoid, multiplied by 0.877 to account for the loss of molecular mass that happens as it is converted to a neutral cannabinoid when heated. Then this calculated concentration is added to the concentrations of the corresponding neutral cannabinoid already present. This corrected data is of particular importance to both producers and consumers of products intended to be heated prior to application or consumption.
View Complete Test Results:
Cannabinoid Analysis
Tested
Show More
Tested by high-performance liquid chromatography with diode-array detection (HPLC-DAD).
Method: QSP 1157 - Analysis of Cannabinoids by HPLC-DAD
Cannabinoid Test Results
04/03/2025
Result Views
Swipe left on table to see additional columns
| Compound |
LOD/LOQ (mg/g) |
Measurement Uncertainty (mg/g) |
Result (mg/g) |
Result (%) |
|---|---|---|---|---|
| Tetrahydrocannabinolic Acid (THCa) | 0.05 / 0.14 | ±16.258 | 812.90 | 81.290 |
| Δ9 Tetrahydrocannabinol (Δ9THC) | 0.06 / 0.26 | ±1.842 | 68.74 | 6.874 |
| Cannabigerolic Acid (CBGa) | 0.1 / 0.2 | ±0.45 | 11.1 | 1.11 |
| Cannabichromenic Acid (CBCa) | 0.07 / 0.28 | ±0.357 | 9.36 | 0.936 |
| Tetrahydrocannabivarinic Acid (THCVa) | 0.07 / 0.20 | ±0.141 | 3.81 | 0.381 |
| Cannabigerol (CBG) | 0.06 / 0.19 | ±0.083 | 2.70 | 0.270 |
| Cannabinol (CBN) | 0.1 / 0.3 | ±0.07 | 1.4 | 0.14 |
| Cannabidiolic Acid (CBDa) | 0.02 / 0.19 | ±0.031 | 1.35 | 0.135 |
| Cannabichromene (CBC) | 0.2 / 0.5 | N/A | ND | ND |
| Cannabidiol (CBD) | 0.07 / 0.29 | N/A | ND | ND |
| Cannabicyclol (CBL) | 0.06 / 0.24 | N/A | ND | ND |
| Cannabidivarin (CBDV) | 0.04 / 0.15 | N/A | ND | ND |
| Tetrahydrocannabivarin (THCV) | 0.1 / 0.2 | N/A | ND | ND |
| Cannabidivarinic Acid (CBDVa) | 0.03 / 0.53 | N/A | ND | ND |
| ∆8 Tetrahydrocannabinol (Δ8THC) | 0.1 / 0.4 | N/A | ND | ND |
| SUM OF CANNABINOIDS | 911.4 mg/g | 91.14% |
Learn more
The cannabis plant contains dozens of active compounds called cannabinoids. These compounds are the primary contributors to the psychoactive effects of cannabis.
Cannabinoid testing determines the potency of a sample to aid in dosage considerations.
Residual Solvents Analysis
Fail
Show More
Residual Solvent analysis utilizing gas chromatography-mass spectrometry (GC-MS).
Method: QSP 1204 - Analysis of Residual Solvents by GC-MS
Residual Solvents Test Results
04/02/2025
FAIL
Swipe left on table to see additional columns
| Compound |
LOD/LOQ (μg/g) |
Action Limit (μg/g) |
Measurement Uncertainty (μg/g) |
Result (μg/g) |
Result |
|---|---|---|---|---|---|
| 1,2-Dichloroethane | 0.05 / 0.1 | 1 | N/A | ND | Pass |
| Benzene | 0.03 / 0.09 | 1 | ±0.003 | 0.12 | Pass |
| Chloroform | 0.1 / 0.2 | 1 | N/A | ND | Pass |
| Dichloromethane (Methylene Chloride) | 0.3 / 0.9 | 1 | N/A | ND | Pass |
| Ethylene Oxide | 0.3 / 0.8 | 1 | N/A | ND | Pass |
| Trichloroethylene | 0.1 / 0.3 | 1 | N/A | ND | Pass |
| 2-Propanol (Isopropyl Alcohol) | 10 / 40 | 5000 | ±2.8 | 124 | Pass |
| Acetone | 20 / 50 | 5000 | N/A | <LOQ | Pass |
| Acetonitrile | 2 / 7 | 410 | N/A | ND | Pass |
| Ethanol | 20 / 50 | 5000 | N/A | ND | Pass |
| Ethyl Acetate | 20 / 60 | 5000 | N/A | <LOQ | Pass |
| Ethyl Ether | 20 / 50 | 5000 | N/A | ND | Pass |
| Methanol | 50 / 200 | 3000 | N/A | ND | Pass |
| n-Butane | 10 / 50 | 5000 | ±>240.0 | >5000 | Fail |
| n-Heptane | 20 / 60 | 5000 | N/A | ND | Pass |
| n-Hexane | 2 / 5 | 290 | N/A | <LOQ | Pass |
| n-Pentane | 20 / 50 | 5000 | N/A | ND | Pass |
| Propane | 10 / 20 | 5000 | N/A | ND | Pass |
| Toluene | 7 / 21 | 890 | N/A | ND | Pass |
| Total Xylenes | 50 / 160 | 2170 | N/A | ND | Pass |
Heavy Metals Analysis
Detected
Show More
Heavy metal analysis utilizing inductively coupled plasma-mass spectrometry (ICP-MS).
Method: QSP 1160 - Analysis of Heavy Metals by ICP-MS
Heavy Metals Test Results
04/03/2025
DETECTED
Swipe left on table to see additional columns
| Compound |
LOD/LOQ (μg/g) |
Measurement Uncertainty (μg/g) |
Result (μg/g) |
|---|---|---|---|
| Boron | 0.21 / 0.64 | N/A | ND |
| Chromium | 0.12 / 0.35 | N/A | ND |
| Cobalt | 0.10 / 0.30 | N/A | ND |
| Copper | 0.14 / 0.44 | N/A | ND |
| Lithium | 0.10 / 0.31 | N/A | ND |
| Manganese | 0.13 / 0.40 | N/A | ND |
| Molybdenum | 0.15 / 0.44 | N/A | ND |
| Nickel | 0.13 / 0.39 | N/A | ND |
| Selenium | 0.5 / 1.5 | N/A | ND |
| Silver | 0.15 / 0.47 | N/A | ND |
| Sulfur | 78 / 235 | N/A | ND |
| Titanium | 0.12 / 0.38 | N/A | ND |
| Tungsten | 0.10 / 0.32 | N/A | ND |
| Zinc | 0.8 / 2.5 | ±1.12 | 4.2 |
COA ID: 250331R011-001
For quality assurance purposes. Not a Regulatory Hemp Lab Test Report. These results relate only to the sample included on this report. This report shall not be reproduced, except in full, without written approval of the laboratory.
Sample Certification: California Code of Regulations Title 4 Division 19. Department of Cannabis Control Business and Professions Code. Reference: Sections 26100, 26104 and 26110, Business and Professions Code.
Decision Rule: Statements of conformity (e.g. Pass/Fail) to specifications are made in this report without taking measurement uncertainty into account. Where statements of conformity are made in this report, the following decision rules are applied: PASS - Results within limits/specifications, FAIL - Results exceed limits/specifications.
References: limit of detection (LOD), limit of quantification (LOQ), not detected (ND), not tested (NT), μg/g = ppm, μg/kg = ppb
SC Laboratories California LLC. | 100 Pioneer Street, Suite E, Santa Cruz, CA 95060 | (866) 435-0709 | sclabs.com | C8-0000013-LIC | ISO/IES 17025:2017 PJLA Accreditation Number 87168